Monday, August 10, 2015

trip to roy's with the old guys

Well, for the past few weeks I've been doing the lion's share of my job searching on Mondays, but tomorrow, the weather is iffy, and the Old Guys go out of Etra on Mondays... so I decided to blow off job search this morning (actually, I did some in the afternoon), and I went to Etra to ride with Al and Dennis.






On the way in, I saw Don Sprague putting in some extra miles; I thought I'd gotten the time wrong, but I hadn't. Twelve of us went on this route. At first, there was some discussion that Dennis was leading us to Pierre's, the site of the Freewheelers Christmas party, but then we turned left and started heading south.




We went across Gordon Road, which is not only open, but clear of utility poles in the middle of the roadway, and then along 524, where we were spread out by a headwind.

We stopped at the new Roy's.






I repeat what I said earlier: it's attractive, it's huge, and they treat us like folks. Not the biggest selection yet, but I suspect that's because they haven't been open that long.

Then back. It didn't feel like a tailwind on the way back; it just felt like we were a bit stronger than usual... but doesn't it always feel like that?

And now I have a 35-mile route from Etra that includes the new Roy's about two-thirds the way in!

Saturday, August 8, 2015

high points atlantic, camden, gloucester, and dave kills a tire

This ride had a number of dumb elements to it.

First of all, you may remember that Tom H has set a task of hitting all of the high points in every NJ county this summer. Today he scheduled the ride to hit the high points of Atlantic, Camden, and Gloucester counties, and cumulatively, they don't add up to 600'. The elevation for the entire ride was less than 1000'. Not easy to do with over 55 miles of distance!

We met at the Muschal school in Bordentown, and then had to drive over an hour to the real start in Hammonton:






From there, we rode a few miles to the high point of Atlantic County. Impressive!




Then back down the same road, to hit the high point of Gloucester:


Possibly because the terrain is so flat, many of the roads are straight. There were some curves on this ride, but we needed to be warned about 'em. On to Gloucester's high point, in the front yard of a church:







Then. although we were less than halfway along (by a lot), we stopped at a Wawa, because Tom could find it and we didn't know what we'd find further along. Laura tried to give away her muffin bottom, but got no takers, until she said, "It's really not a ride until someone takes my bottom." Ahem.






Then, along the demanding climb to the high point of Camden, Tom's saddlebag fell off. The ensuing report sounded when it jammed Dave's wheel; he slid a bit, and his tire was so worn that the tire wore right through, and the road tore up the tube.





Some gash, eh? Did you also notice that the entire circumference of the tire is worn to the fabric? Dave swears the tire looked good when he inspected it this morning. The wear must have been due to those grueling hills.

Laura and Dave tried to patch it up with a boot and duct tape...




... but it was never going to work. Dave started to hobble down the hill, while the rest of us visited the high point of Camden, in a housing development.





After that, we rolled back down the hill the way we came (there was a lot of that today) where we saw Dave. He agreed to wait until we could get back to the cars (about eighteen miles away) and go back and pick him up. We had headwinds on the way back, but that last eighteen miles was the highest pace of the ride. I came back with Laura, while Jack, Joe, and Tom went to pick up Dave.

Wednesday, August 5, 2015

wednesday ride with the old guys, and remembering erich

I've applied for over thirty jobs, and done yonks of chores around the house. When we were volunteering at the Event last weekend, Don Sprague mentioned to The Excellent Wife (TEW) that I ought to come out on the Old Guys rides again, the ones that Dennis Whitney and Al Porter lead on Mondays and Fridays our of Etra, and Wednesdays from Byron Johnson Park in Allentown.

For a while when I was working, I was off every other Wednesday, and I'd ride with those guys. At the time, Erich Woisetschlaeger was alive, and he'd lead a ride-to-the-ride from Etra down to the Byron Johnson Park, a distance of about ten miles; after the regular ride, the folks who had gone with him would (usually) ride back up to Etra together. Erich was a peaceful, humble person with a great sense of humor (often at himself). I miss him, and there are ways I wish I were more like him.

With this in mind, I got to Etra early. I didn't know if anyone would be there, and I was so early I decided not to wait, and rode down to Allentown myself. At the corner of Sharon and Gordon, there was construction just starting, but I was able to get through.

I got to Byron Johnson park about a half-hour early for the 8:30 start. Few of the riders knew of my job loss, and as they heard about it, the guys I knew were supportive and friendly (after all, I'm not the first person who's ridden with them regularly while job-searching).







Dennis asked me to sweep for this large (22? 23?) group (I bet it was partly so I could feel useful; these guys are remarkably perceptive). With that many, I just hung out in the back and kept track of the few who got behind me, rather than keeping count of everybody.

We went down to Pemberton.



(after that, something dodgy happened to the camera and none of the other pics came out, although it seems to be working now). This group has a range of abilities; some were way off the front, and others were struggling to hang on the back. I made sure we didn't lose anybody, and met a couple of guys I didn't know.

At the Wawa in Pemberton, I held forth about steering tubes and stems, and I hope I didn't put anybody off too much. Then, on the way back, I heard a BANG and found that life-member Mark had a flat; we were close enough to the park, and it was late enough, that the rest of the ride went on, while I stayed back (and stayed out of his way; he did fine) while he changed the tube.

I got back to Byron Johnson Park with Mark, and got invited to ride with the guys again on Friday. And I probably will.

Then back to Etra, alone again. When I got to the construction at Sharon & Gordon, the road appeared blocked... but there was a grassy lot on the corner, and I just rode across it to do the turn. On the rest of the way, I remembered Erich, and thought about which of my sins I'm sorry for, and which ones I'd like to revisit for further consideration and maybe reframing.

This ride page includes my solo rides to and from Allentown, and the ride with the group.

Tuesday, August 4, 2015

won't work


The original is here.

I've seen at least one more of these, and, while it LOOKS like a good idea, I can't imagine how it would work. To get the bike to turn, you've gotta make it lean. That wide lawnmower on the front would resist leaning. And those narrow bars that go between the lawnmower head and the turning fork on the bike would never stand up to the torques needed to make the bike lean.

You could MAYBE do it if the lawnmower were directly under the fork, and you could turn the whole front-end assembly. But better would be to have the wheels of the lawnmower turn like a car's wheels.

At this point, though, the whole business is developing some serious weight (and probably expense). How about dragging the lawnmower behind the bike? Someone could probably get that to work.

laura and the hill slugs - parody song

This has been percolating in my head for weeks (as TEW says, my mind can be a scary place). I emailed it to Laura OLPH, and she replied, "You need to blog this."

It's a song parody, to the tune of Creedence Clearwater Revival's "Down On the Corner" (which I thought was called "Willie and the Poor Boys", but that's evidently the name of the album, not the song). There are a few clevernesses in it, like references to the original lyrics, of which I am inordinately proud.

Out in the Sourlands, there's people riding bikes.
Laura and the Hill Slugs are doing what they like.
If you are a fast boy, and try to ride ahead,
Laura likes to change the route and go and cut you dead.

Glide on the downhills, Grind up to the tops.
Laura and the Hill Slugs are riding: There'll be coffee at the stops.

Try to stay with Snakehead on a downhill; you just can't.
At a busy intersection Jim will sing a chant.
Ron and Jack are quiet; they're trying to beat the rain.
If Cheryl's up from Florida, you'll hear her complain.

Glide on the downhills, Grind up to the tops.
Laura and the Hill Slugs are riding: There'll be coffee at the stops.

We don't give a nickel who can go real fast.
We pay much more attention to the people who are last.
We stop a lot for pictures, you ought to come along.
And if you ride a lot with us you'll wind up in this song.

Glide on the downhills, Grind up to the tops.
Laura and the Hill Slugs are riding: There'll be coffee at the stops.
Glide on the downhills, Grind up to the tops.
Laura and the Hill Slugs are riding: There'll be coffee at the stops. 


... well, it made ME laugh, anyway.

Monday, August 3, 2015

that's the way it goes

After not having ridden on the Event, I was really looking forward to an epic ride for Sunday... but I found a pair of pedals that I had promised to Winter Larry, and he was leading a ride on Sunday, and I had Tom H's cooler from the Event that was to be delivered back to him, and I needed to pick up some wheel tools I had lent to Laura OLPH... so I decided to go on Winter Larry's Back By Lunch ride.

Ten at the start, mostly people I didn't know well; three of them were newbies:






That's Sergei above; I was surprised to see him on a ride that was advertised as slow as this.(Not to worry; he and Klaus, in the red above, beat everybody else to the end.)

Probably because of the number of riders that were new, or new to Larry, he asked me to sweep. We started heading south, down York. Somewhere around East Windsor, Larry's chain broke, and I put in a 9-speed replaceable link I was carrying. My hands were excessively greasy; Larry said I could wipe my hands on his shorts, but I demurred. One of the newbies, Rick, lent me a rag.

Then past Allentown, John had a flat and we stopped.




And shortly after that, one of the riders who had been off the back fell far behind, I noticed him walking the bike. He apparently had a bonk; he was tremulous. Larry came back to see what was up, and we got him together enough to get back on the bike. Then Larry went off to lead the rest of the ride, and I led the rider back to Allentown, and we waited for his ride to pick him up at Bruno's, where proprietor Jimmy Bruno and I settled various international and domestic problems and solved some eternal questions.

It was about forty minutes before I got going again. I started riding north, then decided I didn't want to go straight back, and THEN decided I was going to go in search of the elusive New Roy's Deli, then candidate for the replacement for the benighted Clarksburg Ptomaine Ptower. I turned off on 524, and soon found it:







Wow! It's big enough for a ballroom, with clean, accessible toilets (and a sink that works in the men's room; I didn't check the other one), and staff  that didn't scowl at me. I've gotta see about planning a ride that goes there.

I had hoped to pass the Ptomaine Ptower to get distance, but I didn't realize I'd get to Rising Sun Tavern Road first. I recognized that as a way back to Cranbury, and started back that way. I put "Return to Start" into the Garmin Touring I use (which I've nicknamed "Alan Touring"), and wound up with this route. It's slightly different from one of the usual routes back, but what is life without some discovery?

At the end, I met Sergei and Klaus, who had found their wind and beaten the others back to Cranbury, and I left the rag on Rick's bike rack. Then I was off to do the rest of the daily chores.

When I got home, I tried to fix a creak in a difficult rear wheel. My theory that it was the type of spokes I used did not bear out; it still creaks.after replacing them. Next try: removing each nipple, one at a time, and lubing each spoke contact point. But before that, I want to tune the wheels on The Excellent Wife (TEW)'s new bike (about which I see I still haven't posted anything!).

Edit Aug 4: Removed what appeared to be a spam comment.