Saturday, December 12, 2015

unseasonably warm hill slug ride, and the monster is fine the way he is

Those of you who only see this blog when I post a link on Facebook won't have seen it, but last month, I ran a post about getting a smaller big ring for the Yellow Maserati, my road bike. I figured if I was gonna do it for that bike, I might wanna do something similar for the Krakow Monster, my modified-cyclocross-and-do-everything-else bike. But before I did anything drastic, I wanted to take the Monster out on a road ride and see if it needed modification.

Laura OLPH posted about her plan for today's ride that "We'll take a circuitous route to one of our local haunts." No more info than that. I figured that this one would be a good one to try out the Monster: not too tough, but tough enough to see what it would do.

I met Laura at her house for the usual extra miles, and then Pete rolled in, and we headed to Pennington where we picked up John K and a friend of his, Marty:



We did this route. You'll note shorts and knickers in the pics. I had on tights and two layers, and after the first fifteen miles or so on the hills, I was sweating furiously and wishing I hadn't worn my beat-up shorts (that are not fit to be shown in public) under my tights... but the morning clouded up a bit after that, and I survived the heat. Who would have thought I'd be sweating so much in mid-December? Below, at a couple of getting-caught-up-and-wardrobe-adjustment stops:



(Laura also wanted a picture of the "Hillbilly Hall" sign for a friend. We pass that place every so often, and it's just jarring to see a reference to hillbillies in New Jersey.)

This was a new route for Laura, and we rode a road neither she nor I had ever been on.


I'm trying to persuade myself that I have some ancestral claim to the property.

We stopped at the Sergeantsville store, where we picked up Kevin, who has ridden with many of us before; he continued with us a short way thereafter.


Above, Laura trying to look dangerous with her new black hill bike, called Miss Piggy.




On the way back, I finally remembered to get a picture of this sign, which I've missed several times before:


The letters on the top tube say "Mechanic Hideaway". It's not at my house.

On the other side of the driveway is this "M" with the BMX wheel.


Woooo. Mysterious. Some crypto-bike-shop in the Sourlands.

In any case, the Monster performed admirably on this ride; it doesn't need any mechanical modifications for me (although I may put on a set of fenders I've got hanging around). So I'll only need one 46-tooth chainring.

Hope you're managing during this unseasonable warmth. I'm thinkin' of puttin' in tomatoes.

Sunday, December 6, 2015

new rear wheel, quick ride

So I had a rear hub from a wheel build that didn't work out the way I'd hoped. And, although I always use butted spokes (usually Sapim Race; get 'em at that link and Brandon will definitely hook you up), I know Michael Johnson, award-winning wheelbuilder at Wheelfine Imports, says that straight-gauge spokes are his preference. I decided to build a wheel with straight-gauge spokes to see if I could tell the difference.

Oy. What a time I had with this build. First of all, the rim delivered was black, but I like silver (scratch a black rim, and the metal underneath shows through; scratch silver and it shows silver). Then, when I laced it up, I made every mistake in the book. Then the nipples that came with the order were aluminum alloy rather than plated brass; the aluminum is lighter, but more brittle.

The brittleness of the nipples became a problem, see, because I didn't measure the rim myself, but depended on the advertised measurement. Now, every time I've measured a rim, I've come up with a smaller diameter than the advertised diameter. Sure enough, when I started to build the wheel with the spoke sizes I got using the WheelPro spoke calculator, the drive-side spokes were far too long (there had been something smoky about the results, anyway); enough so that I began breaking nipples trying to tighten them up. I actually had to cut a couple of spokes out using bolt cutters.

So I ordered the shorter drive-side spokes and brass nipples, and wouldn't you know, the wheel built up just the way it was supposed to do. I put on a cassette (almost forgetting to include a spacer that comes with the cassette; I tell you, these wheels are hexed), and put 'em on the Yellow Maserati.

I took it out for a quick ride today (quick, because I didn't have much time before the sun went down, and quick because I averaged 18.4mph over the 14 miles), and I don't think I can tell the difference between these spokes and butted spokes. I probably don't have the power in my legs.

But I think I have a new project. I resuscitated the front hub from the wheel that died in my crash. I've never built a wheel with bladed spokes. It's a front with rim-braking, so the spokes will be the same on both sides. I doubt I'll see any improvement with the bladed spokes, but I'll have the experience of working with 'em. (You'll probably be able to hear the swearing in Burlington County.)

Hope youse have a good week. Check in and let me know how youse are doing.

on bs

I came across this article about detecting bullshit in my internet stumblings, and emailed it to Laura OLPH for her input, as, of all the people I know, she's one of the least likely to be taken in by impressed with pseudo-depth. She mentioned that she'd seen the original article, which, it turned out, was linked in the article I'd seen.

I doubt most of you are going to read all of either one, so here's some TL:DR: There is a subset of the population that is likely to find deep meaning in randomly-generated phrases that are designed to sound like they have deeper meanings.

From the article:

Those more receptive to bullshit are less reflective, lower in cognitive ability (i.e., verbal and fluid intelligence, numeracy), are more prone to ontological confusions and conspiratorial ideation, are more likely to hold religious and paranormal beliefs, and are more likely to endorse complementary and alternative medicine.

It made me smile to see that the second subhead of the main article - the second subhead- was titled, "Pseudo-profound bullshit".  THIS is the kind of thing that I'm glad to see research money spent on. I didn't see a disclaimer about funding sources in the article, but I hope they got some money from the NSF.

Edit Dec 7 2015: Two of my science-y friends point out that text in the original article says, "Funding for this study was provided by the Natural Sciences and Engineering Research Council of Canada." Sounds legit to me.

Saturday, December 5, 2015

early december ride to califon.

On one hand, it was not my best day; I'm a little crazier today than most days. On the other hand, with this ride, I've hit my goal of riding in every calendar month in 2015 (some years I haven't hit it, when there's been a run of bad weather through the winter).

Eight of us did this route from Hillsborough to Califon: Laura and I (of course; it was her ride, and I wouldn't be posting if I hadn't gone), Chris C, Jack H, Winter Larry, Snakehead Ed, Peter, and sometime-Hill Slug Robert. Few pics: I forgot to take many - I was too busy battling my inner demons.




I have no idea where these were taken.




Below, at the Califon General Store. I wish all our stops were like this place.




Chris was wearing two layers of tights today. Don't you wish you could see the other ones, too?


I'll tell you what, though: the craziness would have been a lot worse WITHOUT the ride.

Thursday, December 3, 2015

Wednesday, December 2, 2015

tony 10 speed

He bills himself as "Bicyclist's Best Resource". He doesn't seem to have any problem with excess humility, but the site does have good information on a number of bike topics, including videos (many are his own) and illustrated how-to's. You'll want to check out Tony 10 Speed.

I'm putting a link over there on the right.

He's in NJ and rides with the Morris Area Freewheelers. How have I not seen this before?

Monday, November 30, 2015

war on christmas

Forget Starbucks. THIS is a sign that there's a war on Christmas.


Found it on Imgur.

Sunday, November 29, 2015

smaller big ring

On one of my recent group rides, I noticed a friend was tooling along in 53x11 top gear. Now, this was on a downhill... but the cadence looked like it was about 20rpm, far from the 60-to-100+ that's the ideal (of course, how much does it matter on a downhill?).

I used to grind up hills in my 50-tooth big ring. But I've seen the error of my ways, and now I'm more likely to spend most of the ride on my smaller, 34-tooth ring. These days, when I have the chain on the big gear in the front, I rarely use anything other than the three biggest gears in the back.

I've had it rattling around the back of my head that this is inefficient, and that I might want an even smaller large ring in the front (standard gearing is 53/39 in the front; modern road compacts are 50/34). The standard cyclocross double is 46/36, but I'm reluctant to add those two teeth on the smaller gear; I LIKE my low gear! I USE it!

One of my bike blog gurus is Dave Moulton (no, the Moulton you're thinking of is Alex Moulton). I've had a link to Dave's blog over there on the right for years, and he'll never know how tickled I was to meet him at the 2014 Philly Bike Expo. I came across one of his posts about replacing his big ring with a 46. From his post:

Even with a “Compact” crankset with 50 – 34 chainrings, the 11 speed rear cassette comes with a 11 or 12 tooth top sprocket. And the 12 x 50 gives me a top gear of 112 inches, which I can guarantee I am never going to use.
Even more frustrating, the gears I use most, the ones between 65 inches and the upper 70s, fall all the way over on the large inside sprockets of the cassette, when using the 50 tooth chainring, and the other extreme when using the inside 34 chainring and outside small sprockets on the rear.
Riding most of the time with my chain out of line just causes unnecessary wear on chains and sprockets.

He found one for his Campagnolo setup, and apparently it works for him. I can get either a Shimano or FSA for my cranks for about $45 plus shipping. The only things that are stopping me:
  • I'll have to adjust the derailleur, which MIGHT mean re-cabling, which MIGHT mean tearing off the nifty (but already slightly soiled) yellow tape that was a gift from Snakehead;
  • I'll probably have to shorten the chain... so maybe I'll wait until it's time to change the chain anyway, and
  • With Christmas coming, I can think of better ways to spend the money. I mean, I'm glad I'm employed, but I'm hardly wealthy, knowwhumsayin'?
Still, I expect I'll be gearing down by spring.

Friday, November 27, 2015

master class

After a flurry of email correspondence this week, Tom H decided he'd lead a ride from the Mercer East lot today, and a few of us got invited. It turned out five of us showed up, all ride leaders except for me (and I sort-of qualify after doing a few D rides for the club, and social rides for the New Brunswick Bike Exchange). Somebody called it a "Master Class", I presume on the model of musical master classes; I liked it at the time, but the name doesn't quite fit.

But the five of us (Tom, Winter Larry, Chris C, Laura OLPH, and me) like one another and ride well together. We haven't ridden together frequently all as a group, but we have all ridden together, and we know what to expect from each other. There's a certain pleasure just in that comfort and confidence.

At the start at Mercer East, Laura and Chris were in their usual colors. I ride in bright colors to be seen, but I'm a somber sight in comparison.





We did this route. Tom was making it up as he went. One of his recent posts was entitled "Stupid Is As Stupid Does", but the only thing stupid I could catch about this ride was eight crossings of interstate highways, including six of the NJ Turnpike, mostly in the last bit.

I was dressed for the damp cold that prevailed when I left the house, but the day warmed a lot, and I was shedding hat and gloves long before we got to the stop at New Egypt.




When Laura got down to take that bikes pic, she was amused by how much lower her saddle was than the others; she's got a picture on her blog post, but it's not as good as seeing it in person was ( I guess ya hadda be there...).

She was also complaining about an out-of-round section in her wheel, and how the mechanic fellow at the shop she uses said they didn't have the stand to fix it. I was outraged: pretty much every stand has that guide, and you can look at the list of favorite posts in the lower right for a link to the Sunlight truing stand, the inexpensive one I use, that has such a guide. (I think the mechanic dude just doesn't want the job, which I respect: it's  PITA, and he probably can't get enough money for it to make it worth his while.)

On the way back, we stopped at Walnford for pictures.


That might be one for the calendar.

Before the ride, Chris gave me an old (I think) Suntour bottom bracket to use for my bike maintenance classes. It needs a bearing, but I'm not sure I could find such an old thing... but it's still a neat old assembly. I'm glad to have it. When the weather warms and I can get into the garage at night, I'll clean the grease off it.

It was a great day. After being nice to the in-laws yesterday (and eating way too much that didn't really agree with me [and what is this that suddenly there are things that I eat that don't agree with me?]), this ride was just the ticket.

I was reading another blog, where the writer always signs off with a pleasant little address to his readers; it's a custom I'm going to start to steal. So remember: keep the shiny side up and the rubber side down.

Wednesday, November 25, 2015

vaccines


When I was five, I almost died of measles. I have no use for anti-vaxxers.

From today's Oddman.

Monday, November 23, 2015

letting the terrorists win

After September 11, 2001, I let the terrorists win. I was suspicious of Muslims, and angry at the whole world. I was not yet an atheist, but that was one of he events that led to my atheism.

Since the Paris attacks, though, I've thought more about what my reaction must be.

First, I'm hearing from Muslims that the attacks are not Islam (and I didn't have to go search out articles that say so). I don't remember hearing that fourteen years ago.

Second, I understand that what the terrorists want is to precipitate a war between Islam and the west. So hating Muslims plays right into the hands of terrorists.

Third, I know that too many people died in the attacks. But how many people died of complications of smoking in Paris, that day? (This IS France, after all.) How many of auto accidents? How many the next day? And the day after? And on every day since? The number of people dying of terrorism is minuscule. We pay attention to it because it's news. But it's news because it's rare.

Fourth, as far as I can, I'm going to go on with my life ignoring terrorists. There are people whose job it is to deal with them. I'm going to let them do that. If I pay any more attention than that, the terrorists win.

That said, though, I want to say something about why I don't want to see the death penalty for terrorism. There are two reasons for this. The first is that terrorists are nihilists, and they see death as a glorious end. Their cohorts will see them as martyrs. We should not give them that glory.

The second is that I do not believe that death is the ultimate penalty. It is too quick. I'm sure it would be much more painful to have to endure a long, isolated imprisonment, with monotony as your only companion. To die, decades later, forgotten by the world, and have your body and your effects thrown in the trash.

I'm not against the death penalty because it's cruel. I'm against it because it's not cruel enough.

Until that day, I'm going to live my life, being careful of the things that are actually likely to kill me, like traffic and overeating.

Sunday, November 22, 2015

weekend rides

Saturday, Nov 21: Laura OLPH planned a ride notable for two things: the route, which went about 25 miles from Pennington to Lambertville (normally that would be about sixteen miles, but direct is never what we're about), and the fact that we got to see some folks - Mighty Mike, Robert, Celeste, Winter Larry - whom we haven't seen on Hill Slug rides in quite some time. Also notable about the route was the unusual way we left Lambertville: by going up 179 to Mill Road, then across to Rocktown-Lambertville. There wasn't much traffic, and this seemed much less demanding than any of the usual routes (although that may just have been novelty. Unless you float down the river, you've gotta climb pretty much any way you leave Lambertville). While this route included a number of roads we ride often, we did a number of them in the opposite direction. That, and the good group, made this ride fun; I hope we do this route (or some variation) again soon.

Some pics: First, Celeste and Laura both had their lovely blue bikes: I was afraid one or the other  would have to go home and change, or something:










Today, eight or nine of use went out with Jeff H from Cranbury. Over the summer, he'd led a really fast ride (listed as a "B", but actually faster), on some busy roads with little shoulder. He's mostly learned better; the pace was manageable ( you can see on my ride page), but he still takes some busy roads (he seems to like a stop in Englishtown/Old Bridge, near the auction, to which there doesn't seem to be a bike-friendly road). That said, this ride was generally on much better-for-bikes roads than the previous I rode with him; I'll give him an award for Most Improved Player.


Raj was showing off his excellent new Colnago:







We found a road closed on the way out... but we got through.






On the way back, there was ANOTHER closure, but Chris knew we could get through this one.



The group split just before we found this closure. Jeff went to chase the others, and a few of us made out way back.