Friday, February 17, 2012

sunlite truing stand - assembly & usage

The Sunlite Truing Stand arrived today. There's a reason it's as inexpensive as it is; it will do for a wheel true, but I'm not sure it's stiff enough for a "build from parts". Still, I was able to use it to get the worst wobbles out of the wheels of the city bike, and I expect I'll get more adept with it the more I use it.

One of the complaints I saw in my researches about it was that it comes in parts, with no instructions, although it's not heard to figure how it assembles. Nonetheless, herewith find an unboxing and assembling tutorial on the Sunlite Truing Stand:


When you open the box, you find the stand, and a bag of parts.


You'll assemble the parts to form the gauge against which you'll measure the lateral (side-to-side) and radial (distance from hub to rim) true of the wheel. There's a thumbscrew to go through the slot in that hook-shaped part so you can set the radial true. The picture shows it, although in this picture (and the next several) I've got it in the wrong side of the hanger frame, so it will be upside down when I want to use it.


Those other two thumbscrews thread into holes in the side of the hanger fame, so you can set the lateral true. The screws at the top will come off in a bit so you can mount this assembly onto the stand:


Here you can see it with the screws at the top removed. The now-exposed carriage bolts...


... go into holes in the side of the stand. Here you can see one on and one off:


Here's the stand with a wheel in, and the gauge hanger frame in place, with the side screw in so I can set the lateral true. The other piece is to far out now to set radial true, but I wasn't interested in that for now:


Front wheels, and those narrow enough to fit, go in the narrower set of slots at the top. Wider wheels (like the rear wheels on most bikes) go into an additional set of slots a little further down the arms:


That'll do!

Thursday, February 16, 2012

ezra jennings on glitterbombing

Jennings, said, "So the kids who are tossing 'glitter bombs' - handfuls of glitter - at far-right politicos who are against equal rights for sexual orientation are now facing jail time."


"It proves that, in addition to being bigots, these righties are bullies - and, like all bullies, they are essentially cowards."

Wednesday, February 15, 2012

if 'tweren't for bad luck...


By the end of the visit to the ER, we knew that the doctor didn't see anything in the MRI, and we went home with a prescription for Flexeril, an instruction for my wife to take acetaminophen PRN, and an expectation that she would take the day off with a bigger headache than the one she has now.


At about 2:40 this afternoon, she was returning to her job from a lunch break on which she was food shopping, when she was rear-ended by a young driver who tried to pull around and leave the scene of the accident; he was prevented by a number of bystanders, many of whom happen to be my wife's coworkers, until the police arrived. The car can be driven, but will need work; there may be frame damage. The driver hit her with enough force that, less than an hour after the accident, she decided to go to the Emergency Room due to a feeling of increasing pressure in her head. She called me; we came home first, and then went to the ER at RWJ University Hospital, which is where her primary doctor has privileges, in case she needed to be admitted.


We expect that she will take the day off tomorrow. She will contact a body shop where she is known a bit too well (she has had poor luck with being in not-at-fault accidents) to see what will need to be done to the car.


I will be happy not to meet the other driver.

advice from a 70-year-old cyclist

I got this NY Times article forwarded to me today. Sensible stuff about riding safe, picking a bike, and so on.


It's great. Check it out


(This is way better than the article I wrote.)

Sunday, February 12, 2012

how the h-ll did that happen?

This year, the excellent wife and I are celebrating fifteen years of marriage.

I have no idea how it happened. She says it's because I picked the right person, but there's nothing in my history to suggest I could ever do that, and everything to indicate I have an unbroken record of picking the wrong person, so I'm not taking any credit. It must be something she's doing.

Nonetheless, fifteen years. We've been doing the traditional anniversary presents, but mostly as a point of departure; we have fun with it. For example, first year is paper; we got one another tickets to some show - I remember that a woman with whom I was working at the time was horrified that we were being so flippant about our relationship, but I note that we are still married, and she is not. Year thirteen is lace, and I remember we went to a show of Dutch Renaissance painters in which a woman with a flamboyant lace collar was prominently featured.

Year fifteen is crystal. The excellent wife determined that the Waldorf-Astoria hotel...


... has a huge crystal chandelier in the Park Avenue lobby...


... as well as several smaller crystal chandeliers in the first floor halls...



... so nothing would do except a fifteenth-anniversary brunch at the Peacock Alley in the main lobby.

It was a delight. Not that there were many esoteric menu items, but everything there was, was well-done and high-quality, and small details were paid attention to; even the checking of our coats was elegantly and smoothly done. I can't, of course, bring you the food, but the place was a visual feast as well.




And here's the obligatory "we were really there" picture.




The actual anniversary isn't until April, but we like to have a Monday off after we go into the city of a Sunday, and this weekend was convenient for it. We've decided to save the Valentine's celebration for April, instead.

Saturday, February 11, 2012

what i pedal, i wrench

"Marley was dead, to begin with."

I've been thinking too much about this post, and I don't really know how to begin it, and now it's probably going to be too long, too.

I can star it here: when I decided to go on the Anchor House Ride, I found out they have a requirement that riders must turn in a completed Mechanic's Checklist on their bikes. I had built my bike from parts, and it's a point of pride with me that I do my own maintenance... but I didn't want to be disqualified from the ride, so I had the work done (and reduced my personal contribution to the ride by the amount of the charge for the bike inspection). I still had some leftover crankiness about being forced to have someone else inspect my work (the only thing the mechanic fellow did was shorten my derailleur cables), so I went and had this hat made:



(The offending piece of headgear. In this style, 10/6)

I wear it mostly to cover my helmet hair on the way home from group rides, but I also wear it when I'm going to Philadelphia with the excellent wife so I can show off to the hipsters. I was wearing it recently in front of a couple of riders who know way more than I do about such things as differences in frame geometry and which manufacturer is offering which frame options this season. One asked what it meant, and I said that I do all my own maintenance.

WELL! This caused measurable consternation; one opined that he simply didn't have time for all that; he also said that he would be afraid of something letting go when he was rippin' along at 50mph. I shrugged, and thought I had let the whole incident go.

EXCEPT that I hadn't. I found myself thinking over and over about it. When I had my motorcycles, I did my own maintenance on them, except for an electrical problem I simply couldn't figure out (and believe me, I tried), and tire replacement, for which I didn't have the tools. I've fooled around with all my computers; I built from parts the one on which I'm typing this, and I've even been inside both my last laptop to attempt a repair, and my current netbook to upgrade the wireless connection. The only reason I don't work on my cars is that they've grown too complicated (so they're no fun). It would not occur to me to have a machine on which I was having as much fun as I do on the bike, and not tinker with it.

And still I couldn't let it go. And that's the reason I decided to go ahead and order the Sunlite Truing Stand.



Dag-nabbit, not only will I coninue to do my own maintenance, I'm going to boldly go where no few men have gone before: into the esoteric world of wheels. I've even obtained copies of both Jobst Brandt's The Bicycle Wheel (extra credit if someone can tell me how you pronounce that first name) and Gerd Schraner's Art of Wheelbuilding. I may have to buy some spokes and build a wheel, just to soothe my demons.
Now I feel like I need to defend my credibility a bit. In a post from last October, I wrote about some of the changes I was making on my hybrid to turn it into a city bike. Here's a studio shot for a "before" picture:



I've just finished adding the rear rack (after the new handlebars, which required new shifters and brake handles, and subsequent recabling, and...). Anyway, here's a picture of mine, taken this morning:


Drop handlebars, because I like that position better than the upright one (and it gets me out of the wind), although this bike is more relaxed than the road bike (getting the position right took a bit of tweaking). The new bars meant I needed new places to put the shifters. The frame doesn't have downtube bosses for shifters, so I went with bar-end shifters (got 'em from Velo Orange, good for odd or hard-to-find stuff). I know one rider with bar-end shifters on his RB-1 (hey, Joe!), and asked him for tips about cabling... and then, when I got the cheap cables, the housings were too short to take his advice (next time...). Because the brakes are "V-brakes", they require special controls (V-brakes need more cable travel than conventional road bike brakes), and I was able to find those at Rivendell Bikes (which specializes in hard-to-find stuff for retrogrouches and similar nutballs).
Here's a close-up of the front-end setup:



The careful eye will note the bell behind the bike computer.
A few rides in the wet provided a reminder that the risk of getting drenched on a bike is less the water from above than that from below, so I've installed fenders, and, after trying to ride and juggle a few purchases on the way home, I added a rear rack:



You can't see very well in any of the pictures, but because the wheels are 622/700mm diameter, the rack requires clamps on the seatstays; get them from Rivendell, as well.
That picture also shows the remains of the old Specialized BG2 saddle, that is nearly dead, and that I can't get anymore, probably because it's flexible so it doesn't fit some kind of standard that says it's gotta support riders up to 100kg (about 220 lbs.). Sigh. I've had to go with the Selle An-Atomica, to which I refuse to link again, because I'm not satisfied with the saddle (it required a LOT of modification), and because they refuse to allow resellers to discount. Their slogan is "Official Sponsor - the Happy Bottom Riding Club", but a web search for reviews shows a mix of people who love 'em and people who don't (although you don't find the people who don't in their blog), and Rivendell Bike doesn't sell them anymore (their comment about "success has been mixed" on that page refers, I'm sure, to the An-Atomicas).

C'mon, Specialized, bring back that BG2. I'll buy two of 'em.

And sorry for the embarrassing length of this post. But those two with the horror in their eyes when I said I did my own wrenching was just too much for me.





Wednesday, February 8, 2012

cleaning up the ti frame

I've received two compliments on the look of my titanium frame after a cleanup process, so I'm posting it here, mostly so I can go back and remember what I did.
  1. First, clean the frame with any cleaner that doesn't leave much residue. I use glass cleaner (in a previous life, I was a janitor, so I know about this stuff). General-purpose cleaners like Formula 409 will do, but they leave residue, although you'll fix that in the next step (it's just a bit harder).
  2. Next, clean the frame with a rag moistened with mineral spirits or turpentine. Don't go over the decals with this; while a single application of these solvents should not break up or remove the decals, these solvents will eventually affect them (the lacquer thinner that's actually recommended for removing decals is related to these guys). These solvents are not great for your hands: limit your exposure or wear rubber gloves.
  3. Wipe the frame with a dry cloth to make sure any oils are removed.
  4. Go over the roughest spots with 0 steel wool. You won't want to do the whole bike, and this process will leave scratches behind; that's OK for now.
  5. Then go over the whole bike (except for the decals) with 0000 steel wool. Steel wool is readily available in grades from 4 (the most coarse I've seen) to 0000. If you used all the grades, you could get a mirror finish, but most of us don't want that. By judicious use of the 0-then-0000 process, I was able to keep the brushed finish that came on the frame. Careful with this; you want to remove the worst scratches, but not shine so much that the brushed finish is lost.
  6. Use just a little metal polish on the frame, except don't polish the decals. This stuff has abrasive in it, so be careful where you put it. Just-a-little gives the frame a nice finish; too much will lead you toward the mirror finish (that is, frankly, a pain to maintain).
  7. It was probably overkill, but I then went over the whole business with Nu Finish liquid.
The standard practice for achieving the mirror finish is to go over the surface thoroughly with succeeding grades of steel wool, ending with the 0000, then use the waxy polish. It works: I brought the forks of a Honda Magna motorcycle to a mirror finish that way (here's a picture of the way it looks with the dull forks), but I didn't want to do that to the bicycle. I'd post a picture of the bicycle frame, but I don't have a "before", and I'm not sure the difference would come out in the photo anyway.

Sunday, February 5, 2012

ezra jennings on the citizens united decision

Jennings said, "If corporations are people, then a hostile takeover is a kidnapping. Or perhaps murder."

sunday ride, and doin' the taxes

Today was cold and raw, and only three people went out on Winter Larry's ride. We went to Bordentown again, as we had in November, but this time by a different route (crossing the NJ Turnpike three times on the way down, as you can see). On the way back, we tried a different route to reduce the mileage (and the time in the cold & wind, which had picked up). I'd like to do this route again (but we can wait until the weather warms a bit). The ride was pretty, and there was almost no traffic on the way down - people must have been sleeping late preparing for the Super Bowl festivities to come later.

Bordentown is beautiful: right on the river, with a real downtown, Victorian-looking houses, and other homes that appear to have been worker housing. There was money there once upon a time (there may still be, but it was clear that at the time the town was being built, people were showing off their prosperity).

Do I need to start bringing a camera to illustrate these mental ramblings?

Now I'm back home, and I've done the taxes (I use Taxact online; I've tried Taxcut, which always tells us we owe more money to the state than Taxact does, and both Taxcut and Turbotax get all squirrelly when they figure out my computer runs Linux - but all of the products do the work through a web interface that doesn't care what your local OS is, and they all have you download your forms in .pdf format, so why do you have to do this on a Windows or Mac computer?). Once I've got all the paperwork, it's just a matter of filling in the blanks, and Taxact has a go-quick entry method and a let-me-hold-your-hand-and-we'll-get-through-this-together entry method, which is the one I use. And it's cheap (regular readers will know I'm a sucker for the cheap), and includes e-file. All I gotta do now is wait for the excellent wife to wake up from her nap to let me know which account is to receive the refunds.

Tomorrow, back to work. Life could be worse.

Saturday, February 4, 2012

Sergeantville, the easy way

Laura OLPH decided that, while she wanted to go back to Sergeantsville (with the last covered bridge in NJ, and the very cool stop owned by an Asian family), she didn't want to go the same way, so she came up with this excellent route (forgive the little appendix pointing towards Croton; we took a wrong turn). Not too hilly, and some of the wicked hills were in the OTHER direction, so we got to go down them instead of having to climb (like that section between mile 27-28, Pine Hill Road, would be a penitential climb - although maybe I'm just thinkin' that way because Lent is coming). Eight started, and four finished, which is particularly bad for Slugs ride: two decided towards the end of the ride that they didn't want to keep the pace; and Laura decided to drop in at Harts, her LBS (local bike shop), for a cable adjustment, so Chris, who rode in with her, did the chivalrous thing and provided company for her.

A little colder than I would have liked, but a great ride, nonetheless. This week, I actually ate enough to get through the ride, and I can tell: my weight is still up. There is no justice.

Perhaps tomorrow, out from Cranbury with Winter Larry.

Friday, February 3, 2012

do i wanna do this?

The wheels on my city bike are visibly out of true, and the front wheel of the road bike is ever-so-slightly out of true (not enough so it can be felt through the brake lever, but enough so I can see it when I spin the wheel and compare the clearance below the brake pads). The Feedback Truing Station is on sale a few places, and got good reviews:


(That's not the best price I've seen, but it's a good picture.)

A wheel true goes for $20-25 at the local shops, so I could probably justify the price. But if I'm going to get that, I should probably get another chain, and another cassette (I'm on my fourth chain for this cassette - maybe my fifth - and the cassettes are only supposed to last about that many chains; that said, I change my chains more frequently than most, about every 1200 miles... but the cassette is cheap; I can use any 10-speed Shimano/SRAM-compatible 10-speed, as long as the big gear isn't bigger than 28), and another set of cables ('cause they don't eat and they don't rot, and I'm gonna re-cable next winter anyway), and another bottom-bracket cable guide (it's a $2 part, so I change it every time I re-cable), and the original about-$60 order has grown to about $190.

(Sigh.) I don't know if I really want the parts, or if I just feel like spendin' some money.

Thursday, February 2, 2012

maybe form team for franklin ride

Once the Tour de Franklin website is updated, I'll plan to have this email sent out to the membership of the Princeton Freewheelers:

Text Begins

This year’s Tour de Franklin, a ride in support of the Franklin Township Food Bank, is scheduled for April 29. In past years, they have had a number of rides, including a short ride for mountain bikes & hybrids on the D&R Canal Towpath, and road rides of various lengths up to a 62-mile metric century.


I’d like to form a team of Freewheelers to support this ride. The cost of the ride last year was about $50, with no additional fundraising required (although additional donations are gratefully accepted). Riders got a t-shirt and goody bag and were entered in various raffles; lunch was provided at the end of the ride.


If we can form a team of at least four riders, the Freewheelers will make an additional donation of $100 in the club’s name. The requirements are listed on the Archives page of the Freewheelers website. If we get the team of at least four, I’ll send the initial email; each team member will then need to send an individual email to PFWGiving.


Weather permitting, I plan to ride the metric century. Since I can be relied on to get lost, I’d be glad for the company (and the navigation assistance). However, there is no requirement that the team all ride the same route in order to get the support money from the Freewheelers.


You can reply by posting a comment on the Tour de Franklin post of my new site project, Charity Rides – Central NJ (scroll down until you get to that post). I look forward to hearing from you, and I hope that the Freewheelers can form a team for this ride.


Text Ends


Let's see if that gets any bites. The fee is low enough that it shouldn't lock too many people out, and if it works for this, we might be able to pry some cash out of the Board for the Cory's Ride and McBride Ride, as well. Note If you're gonna reply, please post at the Tour de Franklin post of my new site project, Charity Rides – Central NJ rather than here. I can use the traffic!